Material: metal, wood Size: 1" W. x 9" L. Description: metal honed to a narrow shaft and sharp point attached to a natural wooden turned handle of the same length.
Open End Wrench. Material: metal. Size: 2 3/4" W. x 11 3/4" L. Description: metal shaft; open jaws on both ends
Open End Wrench. Material: metal. Size: 2 1/24" W. x 9 1/4" L. Description: metal shaft; open jaws on both ends.
Monkey Wrench. Material: metal. Size: 3 5/8" W. x 15" L. Description: metal adjustable jaw tool; handle extends from head; hanging hole punched through handle end.
Open End Wrench. Material: metal. Size: 2 1/2" W. x 9 1/4" L. Description: metal shaft; open jaws on both ends.
Soldering Iron. Material: metal, wood. Size: 1 1/4" W. x 13 1/2" L. Description: iron or steel, six-sided bar tapers to a point on one end; other end extends to a slender shaft capped with a turned wooden handle.
Thompson Wooden Mallet. Material: wood. Size: 7" W. x 10 1/2" L. Description: wooden head, rectangular block shaped attached to a short, straight wooden shaft handle.
Monkey Wrench. Material: metal. Size: 2 3/4" W. x 8 3/4" L. Description: metal adjustable jaw tool - handle extends from head - hanging hole punched through handle end.
Monkey Wrench. Material: metal. Size: 3" W. x 12 1/4" L. Description: metal adjustable jaw tool; handle extends from head; hanging hole punched through handle end.
Material: metal, wood. Size: 2" W. x 9 1/2" L. Description: metal tool - narrow shaft tapers to a sharp point on one end - other end extends to a turned wooden handle - narrow metal band separates tool shaft from handle.
Material: metal. Size: 1/2" W. x 12 1/2" L. Description: metal - long rectangular blade with teeth along both sides and a hole in each end.
Monkey Wrench. Material: metal. Size: 3" W. x 12 1/4" L. Description: metal adjustable jaw tool; handle extends from head; hanging hole punched through handle end.
Material: metal. Size: 3" W. x 7 3/4" L. Description: iron assembly - narrow rectangle - t-shaped side extension.
Thompson Boat House Carpenter's Level. Material: wood. Size: 3" W. x 30" L. Description: wooden rectangle with an internal device used to determine level line along a surface.
Material: metal, wood. Size: 1 1/2" W. x 7 " L. Description: flat metal blade riveted to a wooden handle.
Material: metal. Size: 3/4" W. x 13" L. Description: metal tool - flat metal bar tapers to a point on one end.
Material: metal. Size: 5/8" W. x 7 1/4" L. Description: metal - flat metal bar tapers to a point on one end.
Material: metal, wood. Size: 4 1/2" W. x 16 3/4" L. Description: iron tool - flat on one side and pointed on the other side - attached to long wooden shaft handle.
Carpenter's Draw Knife. Material: metal, wood. Size: 4" W. x 10" L. Description: metal blade curved upward to form a semicircular edge in center; one wooden handle riveted on each end of blade.
Material: metal, wood. Size: 4 1/4" W. x 10 1/2" L. Description: steel tool - hemispherical end opposite a flat end - head attached to a long wooden shaft handle.
Material: metal, wood. Size: 4 1/2" W. x 14 1/2" L. Description: metal tool head - flat-bladed, pointed implement attached to a short, turned wooden handle.
Material: metal, wood. Size: 1" W. x 7" L. Description: metal tool head - semicirular edge attached to a wooden shaft handle.
Material: metal, wood. Size: 3 1/2" W. x 9" L. Description: metal tool head - flat blade attached to a short, flattened wooden handle.
Material: wood. Size: 1" W. x 6 1/4" L. Description: metal pointed shaft extends to a short metal handle.
Material: metal. Size: 1 3/4" W. x 5" L. Description: iron tool head - flattened on sides, top and bottom - one end forged into a tapered wedge, the other end shaped to a flattened striker.
