Material: metal. Size: 3/4" diameter x 3/4" deep. Description: gold and silver toned metal - (one of two in set #3246 EA, EB) - link face design of gold tone ship's wheel overlaid by U.S. Navy insignia and silver eagle - backed with a hinged buttonhole prong - revolver safety catch on back.

Material: plastic, metal. Size: 3/4" diameter x 5/16" thick. Description: white pearled plastic (set of nine #3246 FA-FI) - slightly convex top - metal shank backing with a silver tone attaching pin.

Coast Guard SPAR Uniform Pin. Material: metal. Size: 1" square x 5/16" D. Description: gold toned metal shaped into two crossed anchors, centered with a shield and disk and raised border printing: "semper paratus" (always ready) and "United States Coast Guard 1790"; threaded post on reverse side with a removable cap. Part of U.S. Coast Guard SPAR Uniform that includes: cap, garrison cap, blouse, shirt, skirts, slacks, belt and service crests.

Golden Key Pin. Material: metal, mineral. Size: 1/2" W. x 3/4" L. x 3/16" D. Description: gold tone metal - black and orange enameled key-shape - diamond chip in center - imprinted: "The Great American Tea Company Golden Key Club" - threaded screw and disk closure on reverse - stamped on reverse: " Whitehead & Huag Co. Newark, N.J."

Independent Order of Odd Fellows (I.O.O.F. IOOF) Comee Lodge No. 25 Ribbon. Material: metal, textile, plastic. Size: 3" W. x 8 3/4" L. Description: black silk ribbon; red silk backing; vertically designed rectangle; silver printing on both sides: "Comee Lodge, No. 25 IOOF Waseca, Minn."; metallic fringe at bottom edge; gold medallion suspended from a gold metal oval pin at top of ribbon; paper label between ribbons: "Made by the M.G. Lilley & Co., Columbus, Ohio, Manufacturers of Badges, Banne ... more

Material: metal. Size: 13/16" W. x 7/8" L. x 5/16" D. Description: gold metal ring - beveled band - triangular face engraved: "Waseca H '16 S".

Material: metal. Size: 3/4" W. x 11/16" L. x 3/8" D. Description: gold metal - beveled band - 6-sided silver tone metal face - engraved: "19 WHS 22".

First Prize Centennial Ribbon. Material: textile, metal. Size: 4 1/2" W. x 14 1/4" L. Description: gold tone metal disk with wide purple edging; purple satin ribbon extends down from disk; gold lettering on ribbon: "Waseca Centennial Celebration, June 16-23 1968 Waseca, Minn. First Prize"; straight pin clasp on reverse.

Material: metal. Size: 5/8" diameter. Description: enameled metal disk cap pin - navy blue border - white inner border - red center, one chevron under "AEF" (American Expeditionary Force) - reverse: safety pin style closure. Part of U.S. Army Uniform, 6.86.1-8.

PLACEHOLDER U.S. Army Uniform. [c] Collar button. Material: metal. Size: 1" diameter x 3/8" D. Description: bronze - disk with raised lettering: "U.S." - centered back threaded prong with nut - two prongs also project from back of pin to be worn on uniform blouse buttonhole. (d) Collar pin. Same as [c] except for concave nut and one prong only.

U. S. Army Signal Corps W. W. II Insignia. (e, f) Material: metal. Size: 7/8" W. x 1 3/16" L. x 3/8" D. Description: enameled bronze insignia display: crossed signal flaps over a torch, red square center on one flap, white square center on other flap; two prongs on reverse with attached pressure nuts; worn on U.S. Army jacket lapel. U.S. Army uniform.

Army Military U.S. Insignia of Edwin Herbig. . (g, h) Material: metal. Size: 11/16" W. x 1/2" L. x 3/8" D. Description: bronze military insignia shaped into letters "U.S.", two pronged reverse side with pressure nut on each; worn on collar of U.S. Army jacket World War II. U.S. Army uniform.

Gold Toned Leaf World War II Pin of Major Edwin Herbig. Material: metal. Size: 11/16" W. x 1 1/8" L. x 3/8" D. Description: gold tone leaf-shaped, domed in center; seven lobes indicates rank of Major; revolving safety catch pin on reverse; worn on U.S. Army garrison cap front left side. U.S. Army uniform World War II.

b) Collar pin. Material: metal. Size: 1 3/16" W. x 7/16" H. x 1/2" D. Description: silver tone metal - prongs and pressure nut on back to attach to jacket collar #41.92.11a. (c) Collar pin. same description as above. Part of Civil Air Patrol Uniform #41.92.10 (cap), #41.92.11a (jacket), #41.92.11b-e (military insignia).

PLACEHOLDER (d) Rank insignia. Material: metal. Size: 1 3/8" W. x 1/2" H. x 7/16" D. Description: gold toned metal - light blue enameled square on each end of rectangular bar leaving a gold center square - two backside prongs with attaching pressure nuts on each - worn on the outer end of the shoulder strap of jacket #41.92.11a. (e) Rank insignia. Same description (d). U. S. Civil Air Patrol Uniform - #41.92.10 (cap), #41.92.11a (jacket), #41.92.11b-e (military insignia).

Oak Leaf USN Nurse Pin. Material: metal. Size: 1/2" W. x 7/8" L. x 7/16" deep. Description: bronze colored metal - rank insignia - oak leaf shape - backed with two attaching prongs and pressure nuts.

U.S. Navy Nurse uniform collar pin. Material: plastic, metal. Size: 11/16" diameter x 1/2" deep. Description: blue plastic disk - raised U.S. Navy crest on top - silver tone metal shank with a 1 1/8" L. silver colored metal pin to collar attachment.

Material: metal. Size: 3/4" W. x 5/8" H. Description: gold tone metal - two horseshoes - elephant's head (Republican symbol) between them - back: pressure nut for closure.

World War II Military Badge of James Gutknecht. Material: metal. [c] U.S. Army insignia. Size: 1 1/4" diameter x 3/4" thick. Description: bronze medal eagle shaped clutching wheat sheaf and torch in talons; ribbon and medallion at top; threaded screw end on back. (b) Clasp. Size: 1 1/2" diameter x 1/8" deep. Description: bronze disk with a small center hole attaches to screw end of #4668b, both #4668 (b,c) fit through an eyelet in cap visor (4668a) and attach with two washers and a hexag ... more

Material: metal. Size: 3/4" W. x 3/4" H. Description: gold tone metal - two horseshoes with donkey's head (Democratic symbol) between them - back: pressure nut for closure.

Hoover Button. Material: metal. Size: 1 1/8" W. x 5/16" L. x 1/8" D. Description: blue front on gold tone - rectangular shaped - attached circular attaching tab bends toward back - gold raised letters: "Hoover".

Ike and Nixon Button. Material: metal. Size: 3/4" diameter. Description: red, white and blue painted disk - printed information: "Ike and Nixon" - straight attaching pin on reverse.

Nixon-Agnew Vote Republican. Material: metal, paper, plastic. Size: 3 1/2"diameter x 1/4" D. Description: white plasticized paper over a silver toned metal disk; red lettered information: "Nixon Agnew Vote Republican"; blue graphics of star and candidates' faces; safety pin closure on back.

Material: metal, paper, plastic. Size: 3 1/16" diameter x 3/8" D. Description: gold plasticized paper over silver toned metal disk - red lettered information: "Hubert Horatio Humphrey Veep in 65" - safety pin style closure on back.

Material: metal, paper, plastic. Size: 2 15/16" diameter x 3/8" D. Description: red, white and blue plasticized paer over a gold toned metal disk - blue lettered information on a white background: "Nixon and Lodge" - safety pin style closure on back.