1.22.2
Sign
1962 Approximate
Civil Defense Fallout Shelter Sign. Material: metal. Size: 14" x 20". Description: black and yellow galvanized steel with partially reflectorized surface and overlays, a black circle set against a yellow rectangular background, three yellow triangles are arranged in geometric pattern with the apex of the triangles pointing down; below the fallout symbol, lettered in yellow against black, are the words "Fallout Shelter” in plain block letters; a circle outlined in gold encircles the gold word "Capacity" and is set within the lower black triangle of the black circle; printed in small yellow letters near the bottom edge of the sign, " DOD FS No. 1, (Not to be reproduced or used without Department of Defense Permission).
Brought in by Dave Dunn. The "Posting Fallout Shelter Signs Handbook" FG-C-8.1 (June 1964) describes the sign ...: "Exterior sign, Type I, size 14" x 20", aluminum, 0.025" thick with partially reflectorized surface and overlays. Used to mark facility entrances." The interior signs were made of steel. The same document describes a similar sign as follows: "Interior sign, Type II, size 10" x 14", galvanized steel, 0.018" thick, with partially reflectorized surface and overlays. Use inside facilities to mark access routes to shelter areas and the shelter area itself." The Office of Civil Defense originally intended fallout shelters to use the radiation warning symbol (yellow background with a magenta circle in the center of three magenta blades) but this idea was rejected because a fallout shelter represents safety whereas the radiation warning symbol represents a hazard. The above version of the national fallout shelter sign was introduced to the public by the Defense Department on December 1, 1961. It was intended to only be used with federally approved shelters. Unlike this example, these signs often had yellow arrows below the words "fallout shelter" to indicate the direction to the shelter. In 1962, contracts were negotiated for the production of 400,000 aluminum outdoor signs and one million steel signs for indoors. The following description is taken from a draft version of a fact sheet entitled "National Fallout Shelter Sign." "In awarding the contract for design of the sign to graphic arts studios it was designated that the services of a psychologist be obtained to recommend a visual symbol that could be easily identified and remembered. The sign had to meet the psychological requirements of simplicity, easy identification, retention and arresting color combination." "It had to be simple enough to be easily identified by children, non-English speaking persons or others who may not be able to read. The color combination, yellow and black, is considered as the most easily identified attention getter by psychologists in the graphic arts industry. The sign can be seen and recognized at distances up to 200 feet." "The shelter symbol on the sign is a black circle set against a yellow rectangular background. Inside the circle, three yellow triangles are arranged in geometric pattern with the apex of the triangles pointing down." "Below the fallout symbol, lettered in yellow against black, are the words Fallout Shelter in plain block letters. Yellow directional arrows are located directly underneath the lettering which will indicate the location of the shelter."